A good mold starts with silicone that suits the object you’re copying and the material you plan to cast. The wrong batch size can leave you short mid-pour—or with more silicone than you’ll use.
These 10 kits span small test batches, larger pours, firm 30A formulas, softer 8A silicone, and clear or translucent options. Use the guide below to narrow down what matters for your project.
Best 10 Silicone Mold Making Kit Picks for 2026
Best for Large Batches
LET'S RESIN 140oz Silicone Mold Making Kit
- 140oz translucent silicone supply
- 1:1 mix ratio by weight
- Five-minute working time
Best For: Larger projects and makers prepared to pour quickly
Best for Longer Working Time
LET'S RESIN 64oz Platinum-Cured Silicone Kit
- 40–50-minute working time
- 1:1 ratio requires a digital scale
- 8–15-hour room-temperature cure
Best For: Beginners who prefer an unhurried pour
Best Starter Trial Kit
LET'S RESIN 8oz Fast-Cure Silicone Kit
- 8oz trial-size supply
- Includes cups, sticks, and gloves
- 3–6-hour stated room-temperature cure
Best For: First-time makers trying a small project
Best for a Quick Small Batch
LET'S RESIN 20oz Translucent Silicone Kit
- 20oz craft-mold supply
- Cure starts at a stated four hours
- Not for food molds or squishies
Best For: Moderate-size craft molds with a quicker cure
Easy-Pour Blue Pick
BBDINO Sapphire Blue 30A Silicone Kit
- 38.8 oz; mixes 1:1 by volume
- 30–40-minute working time
- Low-viscosity pour; no vacuum needed
Best For: Easy-to-measure small and medium craft molds
Flexible Detail Pick
CHANGTIKEJI 64 oz 10A Silicone Kit
- 64 oz across two bottles
- Soft 10A molds for detailed shapes
- 1:1 mix by weight or volume
Best For: Flexible 3D molds and easy demolding
Supportive Mold Pick
BBDINO Clear 30A 4.4 lb Silicone Kit
- 4.4 lb across two bottles
- Firm 30A silicone supports heavier casts
- 1:1 mix by weight or volume
Best For: Larger two-piece molds and supportive casts
Best for Large, Supportive Molds
BBDINO 30A Sapphire Blue, 4.4 lb
- 4.4 lb of supportive 30A silicone
- 1:1 mix by volume or weight
- About five-hour cure
Best For: Larger molds for resin, plaster, or concrete
Best for Flexible 3D Molds
- Soft 8A rubber for easy demolding
- 1:1 mix by volume
- About four-hour room-temperature cure
Best For: Flexible 3D and flat craft molds
Best for Smaller, Firm Molds
BBDINO 30A Translucent, 2.42 lb
- Supportive 30A translucent silicone
- 1:1 mix by volume or weight
- Three-to-five-hour stated cure
Best For: Smaller cut-open or two-piece molds
Best for Large Batches – LET'S RESIN 140oz Silicone Mold Making Kit
This 140oz silicone mold making kit provides a large supply of translucent, platinum-cured silicone for making resin, wax, candle, and soap molds. Its 1:1 mix ratio by weight is straightforward, but the stated five-minute working time calls for preparation before mixing.
Best For: Makers who need plenty of silicone and can pour promptly after mixing.
Pros:
- Large 140oz supply suits multiple projects or larger pours.
- Bubbles are stated to dissipate within two hours without vacuum degassing.
- Flexible, translucent material can be colored with mica powder.
Cons:
- Five-minute working time leaves little room for adjustments.
- Full curing takes at least 6–12 hours, depending on mold size and thickness.
Choose this size when volume matters more than a relaxed pour. Have your mold box and measurements ready before combining the two parts.
Best for Longer Working Time – LET'S RESIN 64oz Platinum-Cured Silicone Kit
This 64oz silicone mold making kit offers a stated 40–50 minutes of working time, giving you more time to mix and pour than the shorter-window options in this lineup. The translucent two-part silicone is suited to DIY resin, wax, candle, and soap molds.
Best For: Beginners or makers who want extra time to pour detailed projects.
Pros:
- 40–50-minute working time allows a less hurried pour.
- 1:1 ratio by weight keeps the mixing proportions simple.
- Bubbles are stated to dissipate in about two hours without vacuum degassing.
Cons:
- Requires a digital scale to measure the two parts by weight.
- Full curing takes 8–15 hours at room temperature.
- Not intended for making squishies.
This is a practical pick when setup and careful pouring take priority over a quick demold. Plan for the longer room-temperature cure.
Best Starter Trial Kit – LET'S RESIN 8oz Fast-Cure Silicone Kit
This 8oz silicone mold making kit is a small-scale way to try mold making without buying a larger supply. It includes mixing sticks, measuring cups, and disposable gloves, along with translucent, platinum-cured silicone.
Best For: First-time makers testing a small mold project.
Pros:
- Includes two sticks, two 100ml cups, and two pairs of disposable gloves.
- Stated 30–40-minute working time gives time to mix and pour.
- Cures in a stated 3–6 hours at 73.4°F/25°C, depending on mold size and thickness.
Cons:
- 8oz quantity limits the size or number of molds you can make.
- 1:1 ratio must be measured by weight.
- Not suitable for making squishies.
The included basics make this a convenient trial kit. If you already know you need several molds, a larger silicone supply may be more practical.
Best for a Quick Small Batch – LET'S RESIN 20oz Translucent Silicone Kit
This 20oz silicone mold making kit balances a smaller supply with a stated cure time of at least four hours at room temperature. Its translucent, platinum-cured silicone is intended for DIY resin, wax, candle, and soap molds—not food molds.
Best For: Craft projects that need a moderate amount of silicone and a relatively quick cure.
Pros:
- Stated cure time starts at four hours, varying with mold size and thickness.
- 1:1 mix ratio by weight is easy to follow.
- Flexible finished molds are described as capturing fine details and releasing easily.
Cons:
- Not for making food molds or squishies.
- Product notes give conflicting working times of 30 and 40 minutes.
This is a useful middle-size option for craft molds when you do not need a large batch. Because the stated working times differ, prepare your pour before mixing rather than relying on the longer figure.
Easy-Pour Blue Pick – BBDINO Sapphire Blue 30A Silicone Kit
This silicone mold making kit pairs 38.8 oz of sapphire-blue, platinum-cure silicone with a simple 1:1 mix by volume. Its low viscosity makes it easy to pour for one-piece or two-part block molds without vacuum degassing equipment.
Best For: Makers who want a manageable batch for resin, wax, soap, or concrete molds.
Pros:
- Equal-volume mixing requires no scale.
- 30–40 minutes of working time allows time to pour.
- Includes gloves, a mixing stick, an edge-trimming tool, and instructions.
Cons:
- Its 38.8 oz kit provides less material than the larger kits in this roundup.
- The stated 3–5-hour cure time varies with temperature.
The blue color helps you see when the two parts are evenly blended. Choose this kit if easy measuring and pouring matter more than maximizing batch size.
This 64 oz silicone mold making kit uses soft, 10A platinum-cure silicone suited to detailed 3D or flat molds. Mix the two 32 oz bottles in equal parts by weight or volume; the supplied notes give it up to 40 minutes of working time.
Best For: Makers who prioritize flexible molds for detailed pieces and easier demolding.
Pros:
- Soft, elastic 10A silicone helps release cast pieces.
- Mixes 1:1 by weight or volume and includes mixing sticks and gloves.
- Low-viscosity formula is described as releasing bubbles without vacuum degassing.
Cons:
- The stated 2–4-hour cure varies with mold size, thickness, and room temperature.
- Soft 10A molds provide less rigidity than the 30A options in this roundup.
This is the flexibility-first choice when you need to demold detailed shapes. Allow for the stated bubble-release time before counting on a clear, finished pour.
For larger, firmer molds, this 4.4 lb silicone mold making kit supplies two 2.2 lb bottles of platinum-cure 30A silicone. It mixes 1:1 by weight or volume and is designed to give molds support when casting materials such as resin, plaster, or concrete.
Best For: Makers building flat, cut-open, or two-piece molds that need the support of 30A silicone.
Pros:
- Large 4.4 lb kit suits projects that use more silicone.
- Low-viscosity formula self-degasses at room temperature without a vacuum chamber.
- Includes gloves, mixing sticks, and a user manual.
Cons:
- Firmer 30A silicone is less suited to projects where a very soft mold is the priority.
- Heat curing requires a vacuum chamber or pressure pot, according to the supplied notes.
At room temperature, the stated working time is at least 30 minutes, with curing in about five hours. Pick it for mold support and batch size rather than maximum softness.
Best for Large, Supportive Molds – BBDINO 30A Sapphire Blue, 4.4 lb
This silicone mold making kit offers 4.4 lb of 30A platinum-grade rubber for projects that need a supportive mold. The sapphire-blue silicone mixes 1:1 by volume or weight and has at least 30 minutes of working time.
Best For: Makers casting resin, plaster, concrete, or other materials in molds that need added support.
Pros:
- Low-viscosity, self-degassing formula does not require a vacuum chamber for normal curing.
- Cures in about five hours and is described as suitable for hundreds of uses.
- Includes gloves, mixing sticks, edge trim, and a manual.
Cons:
- The firmer 30A rubber may be less convenient for shapes that need a very flexible mold for demolding.
Choose this larger kit when mold support and repeat use matter more than maximum flexibility.
Best for Flexible 3D Molds – BBDINO 8A Jade Green, 4.4 lb
This silicone mold making kit prioritizes flexibility: its 8A rubber is intended for easy demolding of both 3D and flat molds. The 4.4 lb jade-green kit mixes 1:1 by volume, so a scale is not needed.
Best For: Makers who want flexible molds for resin, wax, gypsum, soap, or candles.
Pros:
- Low-viscosity formula pours easily and is designed to release bubbles when given enough time at room temperature.
- Provides about 30 minutes of working time and a stated four-hour room-temperature cure.
- Includes gloves, mixing sticks, and a manual; the two bottles can be recapped to save unused material.
Cons:
- Its soft 8A formulation offers less rigidity than a 30A option for molds that must support heavier casts.
- Self-degassing depends on allowing bubbles time to rise and break.
Pick the jade-green kit when easy release and a generous batch size are more useful than a firmer mold.
Best for Smaller, Firm Molds – BBDINO 30A Translucent, 2.42 lb
This silicone mold making kit supplies 2.42 lb of translucent 30A rubber—a smaller quantity for makers who want a firm, supportive mold. It mixes 1:1 by volume or weight and includes basic tools for preparing a pour.
Best For: Smaller supportive molds, including cut-open or two-piece molds for resin, plaster, cement, or concrete.
Pros:
- At least 30 minutes of working time, with a stated three-to-five-hour cure at about 73°F.
- Low-viscosity, self-degassing formula needs no vacuum chamber for room-temperature curing.
- Includes six gloves, three mixing sticks, edge trim, and a manual.
Cons:
- The 30A firmness may make intricate pieces harder to release than a softer mold would.
- The 2.42 lb kit provides less material than the 4.4 lb options.
This is the practical pick if you want the support of 30A silicone without buying a larger kit.
How We Picked These Silicone Mold Making Kits
We compared the listed kit sizes, stated firmness, appearance, and formula details across the 10 selected options. That puts the focus on practical differences: how much silicone you need, whether a flexible mold will release your casting, and whether seeing the object during setup matters. Product names alone cannot establish real-world tear strength, exact working time, or compatibility with every casting material, so verify those details in the current manufacturer instructions before buying.
Quick Comparison: Match the Kit to the Job
For a first attempt or a small object, the 8 oz LET’S RESIN kit limits the amount of material you commit. The 20 oz translucent LET’S RESIN kit offers a step up in volume without moving straight to a large batch. Several 64 oz and 4.4 lb options suit repeat pours or larger mold boxes, while the 140 oz LET’S RESIN kit is the largest listed choice for frequent use. If firmness is your main decision, compare the BBDINO 8A jade-green option with the listed 30A kits: lower Shore A numbers generally indicate softer silicone.
Key Buying Factors for a Silicone Mold Making Kit
Volume and Mold-Box Size
Estimate silicone volume from the inside dimensions of your mold box, then subtract the approximate volume of the original object. Allow extra for the silicone walls and base your design needs. Check whether a listing’s quantity is given in fluid ounces or pounds; weight and volume are not interchangeable.
Firmness and Release
Softer silicone can make it easier to flex a mold around undercuts or delicate castings, but thin walls may need more support. Firmer 30A silicone can help a mold hold its shape, especially with simpler forms. Neither rating guarantees durability: mold geometry, wall thickness, and handling matter too.
Color, Clarity, and Cure Requirements
Clear or translucent silicone can make positioning an object and spotting trapped air easier; opaque colors may be fine when visibility is unimportant. Check the specified mix ratio, working time, cure time, and temperature range before pouring. Platinum-cure silicone can be inhibited by some materials, so confirm compatibility with your master, sealers, and release agents. Do not assume a kit is food-safe or skin-safe unless the manufacturer explicitly says so for the intended use.
Who Should Buy Which Silicone Mold Making Kit?
Beginners testing one small project should start with an 8 oz kit and a modest mold box. Choose a translucent option if seeing the master during setup would help. Frequent casters should compare total quantity and cost per unit across the 64 oz, 4.4 lb, and 140 oz kits—but buy only what you can use within the stated shelf life. For detailed shapes with undercuts, consider the softer 8A option; for molds where shape retention is the priority, look at the 30A choices. Whichever you choose, confirm that the formula and cure schedule fit your project before mixing.









